Sale
FLUENTPOWER Electric Submersible Pump, 400W 230V 7000L/H - Imported from UK
"Dear Customer! Due to the daily increase in the Dollar Rate and Stoppage of imports. All product Current Rates are "On Call"
Bank A/C info will be provided upon order confirmation call
Bank A/C info will be provided upon order confirmation call
Rs.21,990
Rs.28,044
BRAND: FLUENTPOWER MODEL NO: FSP400C 400W 7000L/H FLUENTPOWER is a professional manufacturer of water pumps. This pump is mainly used for drainage and water transfer and as an anti-flood measure for basements. NOTE: Do not use in applications that demand high pressure. Minimum Water Level for Float Switch Starts Automatically Minimum water...
customers are viewing this product
- BRAND: FLUENTPOWER
- MODEL NO: FSP400C
- 400W
- 7000L/H
- FLUENTPOWER is a professional manufacturer of water pumps.
- This pump is mainly used for drainage and water transfer and as an anti-flood measure for basements.
- NOTE: Do not use in applications that demand high pressure.
- Minimum Water Level for Float Switch Starts Automatically Minimum water level for float switch starts automatically from 30 cm. If the water level is not enough, you need to hook the float to the "ON" position and have it manually controlled. Just be careful of running dry with this mode.
- Solid Pass The pump is designed to operate with clean water only. Its maximum passage is 5 mm. Do not use the pump for salt water, chemicals or acidic liquids, this may shorten the life of the pump.
- Float Switch and Flat Base Auto float is safer to remove clean/dirty water. The flat base allows for automatic installation and operation. It can be used to quickly remove water from swimming pools, ponds, water tank and other large bodies of water.
- Oil Chamber Seal Structure Oil-filled seal structure gives longer life, which is much longer than regular mechanical seal. Thermal protector ensures that the pump will not be burned. Even when the pump trips the thermal overload protector, the pump will work again after cooling down.
- Setting the ON/OFF Operating Point The ON/OFF operating point of the pump can be readjusted by extending the float switch cord. Carefully raise the float switch and check if the pump turns on, then lower again to check if the pump turns off before pumping out the water. The distance between the float switch and the pump should not be too small because the switch should be able to move freely. Also make sure the float switch is off the ground.
- Main Voltage: 230V - 50Hz
- Power: 400W
- Max Flow Rate: 7000l/h
- Max Delivery Head: 7m
- Max Immersion Depth: 7m
- Electrical Cable: 8m
- Max Grain Size: 5mm
- Min Water Level: 50cm